SYSTEM DESCRIPTION

The Vacuum Skimmer/Pump System P18100 is a stationary vacuum pump specifically developed for oil spill countermeasures. The system uses a vacuum pump to provide a strong skimming capability, and a compressor pump to provide discharge and transfer capabilities to a temporary or permanent containment area. The unique two-tank or three-tank design (depending on individual unit) provides for a continuous, smooth operation. The unit is self-contained and may be operated in automatic or manual modes. The system is intended primarily for oil spill recovery, but may subsequently be used to transfer oil from temporary containment areas to permanent storage facilities. A major feature of the unit is the capability of operating in debris-laden oil conditions without interruption. The vacuum system may be deployed for ocean or coastal beach spill situations. The air flow capacity of the system enables suction techniques to be used for beach situations. Because the system readily tolerates debris, rapid spill recovery is possible. Once the spill is recovered the debris can be separated if desired. The unit operates via a diesel-driven vacuum/tank system fitted with a variety of hoses and suction heads. The large vacuum pump skimmer system is supported by two harbor type skimmers and a 2-inch, 4000-gallon skim-pak system. These smaller units support the larger vacuum systems in oil spill cleanup in and around confined spaces.

SYSTEM COMPONENTS

Item ESSM Number Qty

1. Skim-pak, 2", 4000-gph SK0620 1

2. Skimmer, harbor, Mini-Max SK0900 1

3. Skimmer, Termite SK0905 1

4. Vacuum system 1

a. Vacuum system, high pressure, three tank VS0010

b. Vacuum pump/skimmer system VS8100

DESCRIPTION

The 4000-gpm, 2" Skim-Pak SK0620 is a complete emergency response system ready for rapid deployment. The unit includes a separator, hose, and control wand. The Skim-Pak unit is designed to be used as a general-purpose skimmer for oil recovery on lakes, harbors, rivers, streams, and calm water applications.

SPECIFICATIONS

Manufacturer Douglas Engineering

Series 4000

Model 4200

Flow 5 to 68 gpm

Size 2 in.

Draft 5 in.

Weir width 1 ft

Type Flow control

Material Fiberglass

PHYSICAL CHARACTERISTICS

Operating/Shipping

Length 2 ft, 3 in.

Width 2 ft, 1 in.

Height 0 ft, 11 in.

Cube 5 cu ft

Weight 18 lb

REFERENCES

DESCRIPTION

The Mini-Max Harbor Skimmer SK0900 is a center float weir skimmer with 100% unobstructed flow into the collection hopper. The recovery rate is up to 220 bbl/h on light to medium viscosity oils. The center float design makes the skimmer the smallest floating weir skimmer in the market when comparing recovery rate with size and weight of the skimmer.

The skimmer incorporates Desmi's self-adjusting lip adapter. This adapter adjusts the weir lip automatically allowing unattended operation, and it maintains correct weir position relative to the oil/water interface, even on choppy waves. By adjusting weir height to match oil layer thickness, water content is reduced and recovery efficiency increased. The skimmer head may be connected to a self-priming pump or vacuum truck.

SPECIFICATIOINS

Manufacturer Desmi Environmental

Model Mini-max

Recovery rate 220 bbl/h (dependent on available pump capacity)

Inlet weir 24-in. diameter

Outlet Hinged bend with swivel joint and 3-in. camlocking type

coupling (male)

Materials:

Center float, hopper, and floating collar Polyethylene

Bellows Oil resistance neoprene rubber

Discharge system Stainless steel

Draught 12 in.

Suction hose 3-in. diameter corrugated suction hose with 3-in. Cam-Lok

male/female couplings

Discharge hose 3-in. diameter layflat hose with 3-in. Cam-Lok female

coupling at one end

PHYSICAL CHARACTERISTICS

Operating/Shipping

Length 3 ft, 1 in.

Width 2 ft, 11 in.

Height 1 ft, 3 in.

Cube 12 cu ft

Weight 48 lb

REFERENCES

DESCRIPTION

The Termite Skimmer SK0905 utilizes a large free-floating weir lip type skimmer. The flexible, high buoyancy weir system allows for nearly 6 inches of vertical travel for excellent wave following, even in choppy seas. The weir height automatically adjust to match the discharge rate of the pump, making the skimmer easy to ensure high recovery efficiency at all flow rates. The Termite's shallow draft allows for operation in very shallow water. The skimmers high buoyancy to weight ratio and low inertial mass will ensure excellent sea keeping characteristics in offshore conditions.

The Termite is uniquely versatile because it can be used in four modes of operation to fit the operating conditions:

1. Free-floating and off-loaded by DOP-160 screw pump. This provides for a name plate capacity of 189 bbl/hr (approx.).

2. Free-floating and off-load through a separate 3-in. or 4-in. suction port by a diaphragm pump, periastaltic pump, or self-priming centrifugal pump. It is also ideal for offloading with the RO-VAC or vacuum truck. This provides a name plate capacity of 315 bbl/hr (approximate).

3. Free-floating and offloaded simultaneously by DOP-160 and Suction pump. This provides a name

plate capacity of 500 bbl/hr (approx.).

4. Suspended without floats from a crane. No name plate capacity.

The Termite skimmer uses a DOP-160 modified Archimedes screw design which provides many benefits over other types of pumps. The DOP-160 easily cut and processes debris, does not emulsify oil and water when pumping, and has a low weight relative to its capacity and discharge pressure.

SPECIFICATIONS

Skimmer Pump

Manufacturer RO-Clean Desmi Manufacturer Desmi

Model Termite Model DOP-160

Recovery rate 189 bbl/hr Discharge pressure 150 psig

Outlet 3 in. Cam-Lok Hydraulic input:

Flow -3 to +17 gpm

Pressure 1500/3000 psig

PHYSICAL CHARACTERISTICS

Operating/Shipping

Length 5 ft, 9 in.

Width 5 ft, 2 in.

Height 2 ft, 4 in.

Cube 70 cu ft

Weight 165 lb

REFERENCES

DESCRIPTION

The Three Tank Vacuum System VS0010 is a skid-mounted, diesel-powered vacuum pump. The unit uses the positive and negative air pressures developed by a rotary screw vacuum pump and a rotary screw air compressor to draw in and discharge water, oil, emulsions, and debris in a spill response scenario. The vacuum system can skim oil from the water surface or it can be used as a rapid transfer pump for oil and debris. The system is effective in confined areas such as under piers, in shallow water, and in areas with heavy floating debris.

SPECIFICATIONS

Engine Air Compressor

Manufacturer Deutz Engines Manufacturer LeRoi Mfg. Co.

Model BF6L913 Model G1231H

No. of cylinders 4 Rated capacity 300 scfm

Fuel* Diesel Max. pressure 100 psig

RPM (full load) 2300 Max flow rate 300 scfm

Starting Electric

Battery 12 V dc

Horsepower 135 @ 2300 rpm

Fuel consumption 5 gph

Vacuum Pump

Manufacturer LeRoi Manufacturing Co.

Model 40 SSV

Rated capacity 500 cfm

Max. vacuum 29.5 in. Hg

PHYSICAL CHARACTERISTICS

Operating/Shipping

Length 13 ft, 0 in.

Width 7 ft, 4 in.

Height 6 ft, 8 in.

Cube 638 cu ft

Weight 12,500 lb

REFERENCE

DESCRIPTION

The Vacuum System VS8100 is a skid-mounted, diesel-powered vacuum pump. The unit uses the positive and negative air pressures developed by two rotary vane type vacuum pumps to draw in and discharge water, oil, emulsions, and debris in a spill response scenario. The vacuum system can skim oil from the water surface or it can be used as a rapid transfer pump for oil and debris. The system is effective in confined areas such as under piers, in shallow water, and in areas with heavy floating debris.

SPECIFICATIONS

Engine Pressure Pump

Manufacturer Perkins Engines Manufacturer Fruitland Tool & Mfg. Co.

Model 4.236 Model RCF500

No. of cylinders 4 Rated capacity 320 scfm @ 15 psig

Fuel* Diesel Maximum pressure 35 psig

Bore 3.875 in. Max flow rate 380 scfm

Stroke 5 in. Horsepower draw 27 hp @ rated capacity

Displacement 235.9 cu in.

RPM (full load) 2,400

Starting Electric

Battery 12 V dc

Horsepower 78.5 @ 2400 rpm

Fuel consumption 5 gph

Vacuum Pump

Manufacturer Fruitland Tool and Manufacturing Co.

Model RCF800

Rated capacity 476 cfm @ 18 in. Hg

Max. vacuum 28 in. Hg

Horsepower draw 27 hp @ rated capacity

PHYSICAL CHARACTERISTICS

Operating/Shipping

Length 10 ft, 6 in.

Width 7 ft, 4 in.

Height 7 ft, 8 in.

Cube 591 cu ft

Weight 7374 lb

REFERENCE DATA

1. Vacuum System VS8100 Field Use Information Guide

DESCRIPTION

The Vacuum Pump/Skimmer System Van VA2250 is used to store and ship ancillary equipment for the vacuum pump/skimmer system. The van contains adapters, safety cables, flange couplings, various size hoses, a 2-inch skim-pak, spare parts kit for the two and three tank vacuum pump units, and various fittings.

SPECIFICATIONS

None

PHYSICAL CHARACTERISTICS

Shipping

Length 20 ft, 0 in.

Width 8 ft, 0 in,

Height 8 ft, 0 in.

Cube 1280 cu ft

Weight 5000 lb (empty)

REFERENCES